industrial garage door repairs - Garage Door Repairman

Industrial Garage Door Repairs: Out-of-Commission Door Can Be Detrimental!

For any industrial business, a garage is a special place. It’s where inventory and equipment are stored, and it’s also where you can find cars, trucks, and all manner of other vehicles. Because of this, having an out-of-commission garage door can be detrimental; especially if your business relies heavily on your fleet of cars to get the job done. Thankfully, Industrial garage door repairs are here to help you get your garage back up and running as soon as possible! There are multiple parts that make up a garage door, which means there are also several different problems that might crop up from time to time. Whether you need assistance with springs, cables, or another component we’ve got you covered with these industrial electric garage door repairs.

Industrial Garage Door Repairs: Which Component is Broken?

The first step in any garage door repair is to identify the issue. Damage to garage doors can occur in several ways, but fortunately, it’s usually possible to tell which component needs repair just by looking at it. The following are a few examples of common garage door problems and how to fix them.

Fixing Bent Tracks Can Cause Several Issues!

A bent garage door track can result in several problems. The most common problem is that the door won’t close properly, as bent tracks force it to remain slightly open. When a car gets stuck in the garage or hits the garage walls, bent tracks frequently result. Before attempting to fix bent tracks, be sure to remove any cars from the garage. If you don’t, the bent tracks could cause serious damage to your vehicle. To straighten bent tracks, use a six- or eight-foot straightedge and carefully push the track back into place. Be careful not to push the track too far. This could cause it to break and make the problem worse. If the track is severely bent and you’re not confident you can fix the track without breaking it. It’s best to have a professional come out to repair the track.

Replacing Broken or Stretched Springs

Garage door springs are responsible for lifting heavy garage doors. Garage door springs are the most common cause of wear and tear on a garage door. Be sure to turn off the power to your garage door before working on a damaged or stretched spring. It’s best to have a professional replace broken springs, but you can do it yourself if you’re willing to be patient and careful. To replace a broken or stretched spring, you will need to remove the old spring and install the new spring on the track. This can be tricky, so it’s best to have a professional do it for you. It’s important to check the springs on your garage door at least once a year to ensure it’s properly working. When you do this yearly inspection, you can also tighten any loose screws or bolts that hold the springs in place.

Fixing Sliding Doors That Won’t Close or Open

There are numerous reasons why garage sliding doors might become out of alignment. If they’re misaligned, they won’t close properly, and they may even get jammed. Misaligned doors can also bend the track, causing the door to stop moving. As a safety precaution, turn off the power before attempting to realign a door that isn’t quite in the right place. To fix a misaligned door, use a level to determine whether the door is crooked. If it is, use pliers to gently bend the track into place. You can change the bent tracks. You can gently reposition the rollers if the door is out of alignment because they became loose.

Replacing A Broken or Repaired Cable

Garage door cables are responsible for lifting the door. If a cable snaps or becomes cut, the door will come crashing down. Replacing a snapped or broken cable is risky, as the unbalanced weight could cause the door to crash down on you. It’s best to call a professional to do this repair for you. If you’ve already snapped a cable on your garage door and you don’t want to call a professional, you can do this repair yourself. You will need to first use clamps to secure the end of the cable that attaches to the door. Then, you will need to install a pulley system using a strong piece of string or a cord.

Summary

Garage door repairs can be tricky, but they’re also very rewarding. Getting your garage door back up and running is a great feeling, especially if you’ve fixed it yourself. While garage door repairs can be tricky, they’re usually very doable for homeowners and DIY-ers if you follow the right steps and instructions for industrial garage door repairs.

Related Searches: garage door screen repair, garage door seal repair, garage door opener mount repair, best garage door repairman and more…

Skip to content